MTI  |  SKU: MSK115S110

Compact Vacuum Sealer with Integrated Control Unit for Preparing Pouch Battery (160 mm W) - MSK-115A-S

€0,00
Voltage

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

Compact Vacuum Sealer with Integrated Control Unit for Preparing Pouch Battery (160 mm W) - MSK-115A-S

MTI

MSK-115A-S is a compact vacuum sealer for sealing the aluminum-laminated case for pouch cells in a glove box, which integrates temperature, pressure, and duration control into one unit for easy handling without feedthrough of the glovebox. The machine is compatible with both Argon and N2 gas.

SPECIFICATIONS:
Input Power
  • 208-240 VAC only, 50 / 60 Hz. 110VAC can be used with a 1000W transformer. 
  • 600 W power
Vacuum Level
  • Vacuum range:  -95 ~ 0 kPa adjustable
  • The vacuum pump is not included. Please click the picture to the left to order at MTI.
  • If you have your own pump with KF25 PORT, Barbed fitting to KF-25 Adapter is included for immediate use.
Sealing Die
  • Max battery size: ? 160 mm in width, and 190mm in length ? 12 mm in thickness
  • Sealing width: 5 mm (customizable)
  • Sealing length: ? 190 mm
  • Sealing evenness: ? 0.03 mm overlapping precision of top and bottom sealing dies
  • Sealing die type: Sealing blade with rubber buffer (soft-sealing)
Sealing Pressure 
  • Pressure range: 0 ~ 7 kg/cm² adjustable. The vacuum chamber lid and sealing die are needed to be driven by compressed high purity inert gasses with recommended 60 psi pressure.
  • Consumption: ~ 0.1 L compressed air per sealing
  • Please use high purity inert gasses (Ar or N2), when operating in the glovebox. Using Air Compressor driven when operating outside the glove box.
  • Please note the air compressor is not included and not recommended to use in the glove box.
  • Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
               pic1                pic2
Sealing Temperature
  • Two independent digital temperature controllers are built-in.
  • Temperature range: 50 ~ 260  adjustable with control accuracy of +/- 2 
  • Recommended temperature: 200  for top sealing die, and  160  for bottom sealing die
Sealing Time
  • 0 ~ 99 seconds adjustable (3 ~ 4 seconds recommended)
Size
    
  • Dimension: 340 mm L x 380 mm W x 580 mm H
  • The compact 115A is suitable for working in a glove box environment while with plenty of space for other materials and equipment.
                    
Net Weight
  • 50 kg
Glove Box Compatibility
    
  • A KF40 Feedthrough with all necessary wires and tubes is included to allow operating inside the glove box.
  • NO. 1  Vacuum Release
  • NO. 2  Gas Inlet Port (Tube size is 8), for all pneumatic components such as Die and  Lid cover, must use Inert gas when operating in the glove box.(Gas Inlet Pressure ~116 psi)
  • NO. 3  Gas Outlet Port
  • NO. 4  Vacuum Port for Connecting the vacuum pump ( ~11.5mm OD, Barbed fitting to KF-25 Adapter is included TO connect to pump).
  • Attention: High purity inert gasses are required for the operation of the machine.
Optional Supporting Rack
(For 220V version only)
  • A customized supporting rack for extra height is available upon request. Please contact us if you want to order the rack at extra cost.
  • Please click the picture on the bottom right to see the configuration of the sealer in a glove box.
  • Note: The supporting rack is for the 220V version ONLY! The 110V version comes with extra height (Please check the row "Size" to compare), therefore the supporting rack is not needed. 
                  
Warranty
  • One-year limited warranty with lifetime support
Compliance
  • CE Certified
  • NRTL Certification is available upon request at an extra cost
Operation Manual & Video

                        
Application Notes
  • Please wear gloves to operate the machine.
  • Beware of the automatic vacuum chamber lid. Only one operator is allowed for this equipment.
  • Please clean the sealing dies after each use. Clean the sealing die after it has cooled down to avoid corrosion by the electrolyte.
  • Check the level and smoothness of the sealing die surface every week. If there is serious damage to the sealing die, please contact MTI to order a replacement.
  • Lubricate the cylinder every week
  • Check the screws in sealing dies and stage every month. Make sure they are tightened.
  • The compact design enables the operation inside the glove box with Ar atmosphere where Lithium-Sulfur, Lithium Air, Lithium Solid-State or Li-ion half cell will be assembled. Please click the images below to understand these technologies and how it fits in a glove box.
        
Back to top