MTI  |  SKU: PLIB-NTA4

4mm Width Nickel Tab with Adhesive Polymer Tape as Negative Terminal for Pouch Cell, 50pcs/Box - EQ-PLiB-NTA4

€50,44

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

4mm Width Nickel Tab with Adhesive Polymer Tape as Negative Terminal for Pouch Cell, 50pcs/Box - EQ-PLiB-NTA4

MTI

4mm Wide Nickel Tabs for use as the Negative Terminal of Polymer Li-ion Batteries    50pcs/Box

Specification
Material Nickel 99.99%
Adhesive Polymer Tape on the tab allows for immediate hot sealing 
(horizontal polymer strip is made of modified polypropylene (PP) and  polyethylene naphthalate (PEN))
Length 61mm
Width 4mm
Thickness 0.09mm in Nickel Tab
0.28mm in Nickel Tab with Adhesive Polymer Tape (9.0 mm L * 5.2 mm W)
Max. Loading Current 3A
Package     50 pcs/box  
Net Weight 160mg/pcs
Gross Wight 18g (Tabs with Box)
Application 1. Connect to cathode current collector as polymer battery positive terminal
2. Suggested Sealing Method: (parameter below may vary from case to case)        
    - Soft type heat-sealing blade (Blade with rubber, see MSK-140)       
    - 180-200C for upper blade       
    - 160-180C for lower blade       
    - 40PSI (0.3Mpa)       
    - 3 seconds heating time 
Adhesive Polymer Tape on the tab allows for immediate hot sealing
               
Manual & Video
Pouch battery with tabs VIDEO on how to weld the tab VIDEO on how to seal the battery w/ tab
Back to top