MTI  |  SKU: MSKUSP-SP

1.7 MHz Ultrasonic Atomizing Generator with Digital Syringe Pump and Heating Function - MSK-USP-SP-LD

€0,00

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

1.7 MHz Ultrasonic Atomizing Generator with Digital Syringe Pump and Heating Function - MSK-USP-SP-LD

MTI

MSK-USP-SP-LD is a 1.7 MHz Ultrasonic Particle Generator with a digitally controlled infusion syringe pump and a temperature controller. It can be used in line with MTI Tubing Furnaces to form a versatile synthetic system for nanostructured oxide materials.

SPECIFICATIONS
Voltage
  • 110 - 240VAC for universal use
  • 24VDC driving ultrasonic generator
System Features
  • A 316 Stainless Steel liquid container is equipped with a fluoropolymer sealing ring and a heating tape
  • 1.7 MHz ultrasonic generator
  • 3 levels of power output ( low, middle, high)
  • Droplet size: < 10 microns, which is dependent on the viscosity of solution, ultrasonic frequency, gas speed.
  • Continuous mode and timed mode can be set. For timed mode, time can be adjusted from 30 minutes to 180 minutes
  • The quick clamps allow easy removal of components for cleaning or adapting the device with simple connections to the gas supply
  • A liquid injection pump is included and equipped to inject automatically which comes with a 60 ml plastic syringe. 
Digital Syringe Pump
  • Holds small or big syringes up to 60 mL
  • Pumps continuously until you stop the pump
  • The infusion rate can be changed while pumping
  • Remembers previous settings on power-up
  • Power failure mode allows the pump to continue pumping after a reset
  • Displays total volume dispensed in mL or µL units
  • The maximum pumping rate of 25 mL/min with a 60 mL syringe
  • Precise reproducible flow rates
  • Selectable infusion rate units: mL/hr, µL/hr, mL/min, µL/min
  • Infuses Only, does not withdraw, volume target, or have a computer interface
  • An infusion Syringe Pump with an optional Heatable Glass Syringe is available at an extra cost
Temperature Controller
  • The controller uses PID via SSR power control
  • Single-point setting controller
  • Over-temperature protection and alarm allow for operation without attendant(s).
  • +/- 1 ºC temperature accuracy.
  •  A K-type thermocouple with 3mm OD x 4" L is included in the standard package.
        Heating Tape
        • Length:                                      24" 
        • Width:                                       1/2"
        • Input Voltage:                           120V AC
        • Max Power:                              105W
        • Max. Working Temperature:     250°C
        • Electric insulation                     Fiberglass
        • Power Plug:                              included
        Application Notes
        • An MFC can be connected to the upstream to control the carrier gas flow rate. ( Pic. 1)
        • The ultrasonic particle generator can be used in line with MTI Tubing Furnaces and Electrostatic Precipitators to form a versatile synthetic system for nanostructured oxide materials. Please click picture 2 to view the details
                  Pic. 1     Pic. 2
        Dimension
        • Control Unit: 260mm (L) x 190mm (W) x 90 mm (H)
        • Liquid Syringe: 223mm (L) x 147mm (W) x 120mm (H)
        • Ultrasonic Particle Generator: 150mm (L) x 150mm (W) x 210mm (H)  
        Compliance & Warranty
        • NRTL or CSA certification is available upon request on request at an extra cost.
        • One-year limited manufacturer warranty with lifetime support (consumable parts such as O-rings are not covered by the warranty)
        Operation Video

                 		    

        Back to top