• Mobile cart size:  600 (L) x 600 (W) x 700(W), mm
• Max. Loading:       600 Lbs on top
• Molecular pump control Panel:   LCD digital
• Inside:   Pfeiffer vacuum pump  made in Germany
  

• One button operation - the diaphragm pump and the turbo molecular pump will start after pressing "start" button.
• System controlled spinning speed - the controller will control the speed of the turbine spinning up and down according to the vacuum level and leaking rate of the reaction chamber.
• Self-protection - the system will protect the pump from damage by overheating and overcurrent if the leaking rate of the reaction chamber is too high to achieve the high vacuum. 
• LCD screen - double lines parameters checking interface make the working easier to be handled. 

• Molecular pump with KF40 to T type of Vacuum Tube and KF25 to Vacuum Gauge
• Vacuum gauge with KF25 port to install to T -tube
•  1000 mm length SS vacuum bellows with KF40 port to connect to furnace flange
• One  KF40 to KF25 adapter is included to connect the pump to MTI's furnace which has KF25 port on  flange

• Nitrogen    N2     33 L/s
• Helium      He     39 L/s      ( 2340L/minute)
• Hydrogen  H2   32 L/s

Compression Rate

• Nitrogen    N2     >1E11
• Helium      He     6*1E6
• Hydrogen  H2   >1E5

Ultimate Pressure

<1E-8 mbar (without any  leaking )

Start-up Time

2 Min.

Working Range

From 1000 mbar to <1E-7 mbar

Backing Pumping Speed

0.9 m^3/H for 50Hz and 1.0m^3/H for 60Hz 

Duration /max. power

100/110 W

Mains Connection

90-132 V/ 185-265V (Universal)

Weight

180 lb

Optional Accessories

Combinations of EQ-PV-HVS2-LD Turbo-molecular Pumping Station with EQ-VPC-MV Precision Vacuum Pressure Regulating System will be a solution for precisely controlling the vacuum pressure in a vacuum chamber/system.  Order Turbo-molecular Pumping Station with Precision Vacuum Pressure Regulating System from product options or Click the picture below for Precision Vacuum Pressure Regulating System

   ( installation into the mobile cart is available upon request at extra cost )

• One-year manufacturer warranty. (Attention: Improper use will cause all claims for liability and warranties to be forfeited. Improper use is deemed to be all use for purposes deviating from those mentioned in below, especially: 
• Pumping of corrosive or explosive media.
• Pumping of condensing vapors.
• Pumping of liquids.
• Pumping of dust.
• Operation with improper high levels of insulated heat input.
• Operation in potentially explosive areas.)

• To protect the environment & human health, please use Traps & Filters to minimize exhaust. 
• To protect vacuum pump from damage by condensed vapors or small particles, please connect a cold trap or particle trap to the pump fireline ( click on the pictures below for details ).