20KHz 400W Two Ultrasonic Spray Nozzles with Power Controller for DIY Spray Pyrolysis - MSK-SP-02A

Ultrasonic spray utilizes ultrasonic energy to break liquid and form a few-micron drop size. The ultrasonic spray nozzle can use low vibration energy to make liquid atomized via gravity and low-pressure compressed air.  MSK-SP-02A is a 400 W, 20 kHz ultrasonic spraying nozzle with a power controller for DIY, low-cost spray pyrolysis coating, or spray granulation in the material research lab. , which can spray a higher viscosity solution

Ultrasonic Generator & Power Controller	Input power: 208 - 240 VAC,  50/60 Hz (110 V version is available in optional bar) Ultrasonic output: 0 - 400 W adjustable Ultrasonic frequency: 20 kHz
Ultrasonic Converter	PZT (piezoelectric zirconate titanate crystal) Diameter: 25 mm
Converter Cable Length	2.5 m (8.2 ft)
Spray Nozzle	Two Spray nozzles with KF-25 Adapter included. (click the below picture to see details) One cylindrical type - provides narrower spray pattern ~2 cm diameter One cone type - provides wider spray pattern ~4 cm diameter KF25 quick clamp is included to connect the spray head to KF25 port  Made of Titanium alloy (Ti-6Al-4V) Spraying speed:  5 mL/min~ 40 mL/min Fluid viscosity range: 1 - 50 mPa·s (cP) Customized nozzle shape is available upon request at extra cost.
Compressive Air Vortex Shaper   (Optional)	Compressive air vortex shaper for spray nozzles is available at extra cost which will make spraying more uniform. Only suitable for MTI cylindrical type spray nozzles. Compressed air is required.
Average Drop Size	25 um
Compliance	CE certified
Operation Video	How to Operate         Spray Pattern
Warranty	One year limited warranty with lifetime technical support
Optional	You will need an Infusion Syringe Pump to carry and deliver liquid for uniform coating. Please click the pictures below to order a digital or PC controlled Infusion Syringe Pump at extra cost (Pic. 1, 2, 3) You may need a heating plate for the pyrolysis coating. Please click Pic. 4 to order  You may need X-Y axis CNC stage to DIY a coater, Please click Pic. 5 to order (Pic. 5) Please put the device into a fume hood for safety and health (Pic. 6) For high Viscosity liquid, pleaseconsider120Kz an ultrasonic spray head piC7 The equipment listed on the DIY page are NOT naturally compatible with each other. Please email us first to order a customized adaptor, the separate order may not fit.  DIY an Ultrasonic Spray and Electrospinning device.                                     Pic. 1                             Pic. 2                     Pic. 3                       Pic. 4                           Pic. 5                      Pic. 6                          Pic. 7