1700°C Max 10 Channel Tube Furnace (1" Alumina) for Hi-Throughput Annealing - GSL-1700X-MGI-10

• The furnace consists of 10 small tube furnace modules with alumina tube 25 O.D. x 460mm L
• Each heating module is separated by insulation material with air cooling layer, no temperature influence each other
• Each heating module's temperature is controlled independently up to 1600°C
• Quick sealing flange, vacuum gauge, and flow meter are installed to allows heating under vacuum or flowing gas
• Processing 10 samples with the different temperatures at a compact space 

• MoSi2

Working & Max Temperature

• Continuous Working Temperature 1600°C
• Maximum Working Temperature 1700°C (< 1 hrs)

• 10 alumina tubes with 25mm O.D. x 460mm L are included
• 10 Quickly clamped flange with 1/8 gas inlet and outlet, as well as vacuum ports are built-in
• 20 needle valves are optional to connect to gas inlet and outlet for gas flow control
• 10 vacuum ports in the back will be connected to a vacuum pump via 10 to 1 adaptor
• Only one vacuum pump is required via a KF25 port. Click the picture below to choose a vacuum pump
• Max. Vacuum 10^-3 Torr by a mechanical pump and 10^-5 Torr by a turbopump
•       

• 10 channel heating tubes are controlled independently by 30 segments programmable temperature controller
• B type Thermal Couple
• 10 controllers are integrated into a 7" PLC touch screen panel.

Heating Rate

• 10°C/ min Max.    

Temperature Accuracy

• +/- 1°C
• +/- 0.1°C  Euro-therm controller is optional at extra cost.

Power & Working Voltage

• 15 KW, 208 - 240V single phase, 50/60Hz
• Note: Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug
  

• CE Certified
• NRTL (UL61010) or CSA certification is available at an extra cost.

Dimension 

• 1300mm (L) x 800mm (W) x 1500mm (H) 

Warranty

Operation Instruction