Desktop Precision Diamond Wire Saw With Touch Screen Control - STX-202A

STX-202A is a small precision diamond wire saw for cutting sample ? 2" diameter or square up to 50mm in thickness. It is designed to provide smooth cutting for many kinds of materials, especially for fragile crystals and TEM or IC samples by using a 0.28mm diameter x 15-meter long diamond impregnated wire. It is an ideal cutting tool for material research, TEM sample preparation, and IC failure analysis.

Power	Wire Saw Control Unit: Universal 110V to 240VAC, 50/60Hz, 200W max.
Structure	Heavy-duty aluminum alloy structure with compact size automatically controlled Y-axis by the digital panel single wire swing cutting with adjustable wire length from 5-15mm (broken wire still can be used)          Transparent plastic plates are included to prevent Coolant splashing   Add an oil refill cup behind the forming tube, please apply 10-15 drops Anti-Wear Oil before first-time use Wire spooler motor, 3 Amps, Torque = 1.8Nm
Sample Stage	Z-axis: 50mm, automatically controlled by the digital panel Y-axis: 50mm, automatically controlled by the digital panel Two-dimension sample stage built-in 360° degree horizontal rotating and +/-10° tilting via manual operation
Cutting Parameters	Feed Speed: 0.01 mm/min to 40 mm/min adjustable Back Speed: 1 mm/min to 100 mm/min adjustable Spooler spin speed: 1-260 RPM adjustable Cutting depth: 0.1 - 50mm   Positional accuracy: +/- 0.01 mm  Please click the picture left to see the samples cut by this machine
Meteorite Sample	Please click the picture below to view the meteorite samples that were cut by our wire saws.  Fig. 1     Fig. 2     Fig. 3     Fig. 4
Controller & Touch Screen	Color touchscreen controller will setup wire travel speed, cutting speed and slicing width
Diamond Wire	? 15 meters used for each installation One spool of 0.35mm Dia x 20 meters length Diamond Wire is included for immediate use A Diamond Blade Dressing Stone is included for keeping the wire sharp Optional: For slicing or dicing very brittle crystal, you may order 0.125mm Dia. Diamond Wire. Note that 0.125mm Dia. The wire is very easy to break, please reduce the feeding rate to the minimum. Click the picture below to order spare diamond wires  For longer wire life, please use LubeCool -150 Smart Solid Lubricant and Coolant For better lighting, please consider a Fiber Optic Y-shape Dual Light Microscope Illuminator
Wire Tension System	Standard: steel spring wire tension system with break wire alarm is included
Coolant Pump	One water pump is included for cooling diamond wire during cutting You must use anti-corrosive oil or radiator water as coolant (could buy from any auto store) Warning: must clean the machine after each cutting, especially using tap water as the coolant to prevent rust
Optional	Swing & Rotation Sample Fixture: Such fixture needs an independent controller for its parameter settings such as swing frequency/ angle (±23°, up to 20 swings/min), rotating speed, and rounds (30rpm max.) Higher cutting surface quality can be expected by swinging or rotating the specimen throughout the cutting process. Please click Pic.2 &3 and video to learn more details. The fixture will enhance cutting speed up to 2 times  Protective case is available at extra cost, see Pic.4