8" Width PTFE Rolling Press w/ Digital Pressure Display for Lithium Lamination - MSK-HRP-8-PTFE

• Rollers are mde of high quality PTFE
• Size: 96 mm Dia. x 220mm W
• Roll line speed: 0~26mm/s adjustable
• Note: benchtop rolling press is not suitable for calendering thick metals. For applications with such needs, please consult with MTI engineers

• 200 mm

Roller Gap

• 0.001mm
• 

Pressure Force Indication

• 0~2T (the unit display is Kgf) 
• (Note: the actual calendaring force is dependent on the material physical properties such as hardness and thickness. The rolling gap thickness will also affect the applied force.) 
  

Power

Motor (Ar Gas Glove Box Compatible)

• High torque 24VDC motor with reducing gear (1:75) 
• Motor power: 40W
• Rolling speed adjustable: 5~45 r/min
• Digital controlled with constant output power 

Output Thickness

• Depending on the electrode's material and thickness, typically:
• A 0.16mm thick electrode coated on copper can be pressed into a minimum thickness of 0.1 mm
• A 0.06mm thick electrode coated on copper can be pressed into a minimum thickness of 0.04 mm
• A 0.33mm thick silver/gold can be pressed into a minimum thickness of 0.03 mm
• Thickness uniformity: +/- 2 microns if coating electrode thickness +/- 5 micron and each rolling increased < 10 microns

 Optional 

• MSK-HRP-04-RD R2R system can be integrated with the calendaring machine at extra cost to enable the automatic film unwinding -> winding after calendaring.(Pic. 1-3) 
• The vertical version is available upon request at an extra cost (Pic.4)

• CE Certified
• NRTL or CSA certification is available upon request at extra cost.

• Do not touch the surface of the rolling part of the machine when the rollers are heated up or running.
• Multi-step thickness calendaring needed: While calendaring the sample sheet, make each calendaring decrement of 0.02mm compared with the sheet's original thickness.
• Never calendaring decrement over 0.02mm. Never roll materials with hardness > 30HRC
• Clean roller surface for each rolling and Use acetone to clean and lubricate when not in use to avoid corrosion