1 4
MTI  |  SKU: EQ-YLJ-5T-MG

5T Manual Hydraulic Laboratory Press with Separable Pump - EQ-YLJ-5T-MG

€0,00

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

5T Manual Hydraulic Laboratory Press with Separable Pump - EQ-YLJ-5T-MG

MTI

EQ-YLJ-5T-MG is a 5T manual hydraulic pressing machine with the separable pump for easy maintenance. It is an excellent tool for material&chemistry laboratories to prepare compound or ceramic pellet samples.

SPECIFICATIONS:
Max. Pressure 
 5 Tons
Bottom Hydraulic Cylinder Travel Distance 0 - 8 mm
Unit Pressure in the System (max) 70.8Mpa (708 kgf/cm*cm²)
Hydraulic Cylinder Diameter 30 mm
Max. Working Space 30 mm Dia. x 120mm H
Gauge Pressure  vs Cylinder  Force

Pressure Display on Gauge(MPa)

11

22

33

44

56

Force on Hydraulic Cylinder(T)

1

2

3

4

5


Calculation: Force on Hydraulic Cylinder ( T ) = 0.09 T/MPa X Pressure Display on Gauge (MPa)
Electromagnetic Compatibility (Optional)
This is the concept option for the hydraulic press. The press station is opening wide enough for Electromagnetic Compatibility. This is an optional concept only. The electromagnetic equipment is not included with the hydraulic press. For more information, please contact MTI.
Protection Cover 
  • Polycarbonate Safety Shield is included in standard package.
  • Note: Door must be closed during use
Dimension 
230 x 450 x 560L*W*H, mm
Net Weight of Machine 55 Kg (121 lbs)
Shipping Dimensions 39"(L) x 31"(W) x 35"(H)
Shipping Weight 185 lbs
Press Dies Pressing dies with various diameters are available upon request at extra cost
Application Notes Caution: Customers must always wear protective goggles during operation !!!



Operation Instructions
             
    Installation Guide 
Warranty
  • The pressing machine was quality inspected in the USA, lifetime support is provided
  • One year limited standard warranty (Extended warranty is available up to 5 years at extra cost)

Warning

       
  • The pressing die cannot be used for pressing powder with the particle size < 30 microns. Small particles may slip into the gap between pushing rod and steel sleeve and cause damages to the sleeve during the compression. Ball mill and sieve the powder and apply only the 32~75 microns power to the pressing die to avoid the damages. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 microns particles from the powder clumps.
  • Please clean the pressing die using ethanol after the completion of each experiment.
  • Customer must always wear protection goggles during operation.
  • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance. (MAX.25mm)
  • Operate the presser inside the glove box is not recommended
  • Idel long time and back to use need to check the eliminate the air and check the oil level.
 
Back to top