Large-Scale Jet Mill for Roll-to-Roll Dry Electrode Fabrication (100g - 2kg/hr) - MSK-SFM-AF100

MSK-SFM-AF100 is a high throughput lab-scale jet mill for materials with various hardness and properties. It grinds materials such as ceramic, magnet, ferrite, and metallic alloy into micron-scale powder with an output rate of 100g~2kg/hr. Abundant configurations can crush sticky or hard materials. The material feeder is a double-screw self-cleaning type, which is easier to disassemble than other feeders. 

The jet mill grinds with a high-speed jet of compressed air or inert gas to collide the particles with each other. It is capable of outputting particles with the right size while continuing to muff particles above the desired size. Therefore, the ground product comes in a narrow size distribution and good uniformity. Particles are separated from the gas stream by cyclonic separation.

SPECIFICATIONS

Working Power	Gearmotor, AC 380V, 50/60 Hz, Three-phase 11.55 KW
Working Principle Structure Diagram	&nbsp
Feeder	Power: 0.55KW Input Weight: 1-5kg/hr, Self-clean Screw Capacity: 5L SUS304 Stainless Steel (Powder Receiving Chamber)
Jet Mill Features	Chamber Diameter: 100mm Output: 100g~2kg/hr  Working Pressure: 0 ~ 10 Bar Gas Consumption Rate: 1.2 m³/min@10Bar Zirconia milling chamber An air compressor is required, but it is NOT included in the standard package. The output particle size depends on material hardness and input particle size. For larger input particles may need 3-5 times milling to reach the smallest size.
Cyclonic Separation	SUS304 Stainless Steel (Powder Receiving Chamber), Internal Polishing, External Drawing
Particle Collector	Filter Area: around 4 square meters SUS304 Stainless Steel (Powder Receiving Chamber), Internal Polishing, External Drawing
Air Compressor (Not included but required)	Power: 11 kW Pressure: ~140 psi Gas Flow: 1.2 m3/min
Optional	Pre-crushing may be needed to achieve finer particles during jet milling (Click the picture below left to order ) An optional sieve can be used to filter the sample to 100-200 mesh to meet the input requirements. Please click the picture below to view the MSK-SYU-3 sieving system and order at an extra cost.