1 4
MTI  |  SKU: OTF-1200X-S-SB

Hi-Pressure Fluidized Bed Furnace/ Reactor ( 3 bar @1100oC) w/ 1ID Super-Alloy Tube - OTF-1200X-S-SB

€0,00

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

Hi-Pressure Fluidized Bed Furnace/ Reactor ( 3 bar @1100oC) w/ 1ID Super-Alloy Tube - OTF-1200X-S-SB

MTI

OTF-1200X-S-FB contains a single temperature zone vertical tube furnace, nickel-based alloy tube, and a re-feeder with a KF25 port. It is a CVD experimental equipment specifically for the deposition of the powder surface with a max working temperature of 1100C and 3 bar gas pressure
 
Specifications
  • Voltage:  AC 110V 60HZ  ( 2208 - 240VAC is available upon request )
  • Power1.2KW
  • Working Pressure:                             -0.1 ~ 0.3MPa (1100)
  • Maximum Temperature                  1100?30min
  • Continuous Working Temperature  1000
  • Recommend Heating Rate              ?10/min
  • Heating Zone                                   200mm
  • Thermocouple                                 K Type
Heating furnace
  • Fibrous alumina for thermal insulation
  • Double-layer steel structure with air cooling
  • Vertical Split door design for easy installation of tube
  • Separated temperature control unit 
Processing tube



Note:  If remove the feeder and add hi-pressure fitting, the Max. working pressure can be increased to 10 MPa
  • Nickel base super-alloy tube with flanges.   ?30 OD x ?12 IDX 600 L (mm )
  • One mechanical pressure gauge(-0.1-0.3MPa) pre-installed,
  • The pre-installed Safety relief valve will turn on automatically once the pressure reaches 0.3Mpa (Pic.1)
  • One Ni alloy mesh is installed inside the tube center to carry two layers of materials (Pic. 2 &3)
        Pic. 1    Pic. 2     Pic.3
  • A re-feeder connects the tube with a KF25 port on the tube( which is limited pressure to Max. 3 bars)
  • Three different materials can be filled in the re-feeder at the same time by filling into different zones. (50ml each zone) via KF25 adaptor
  •     

Temperature Controller

  • 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
  • Built-in PID Auto-Tune function with overheating & broken thermocouple protection.
  • Over-temperature protection and alarm allow for operation without attendant(s).
  • +/- 1 ºC temperature accuracy.
  • Eurotherm 3000 precision temperature controller is optional with +/- 0.1ºC accuracy

Dimensions

340mm×220mm×1200mm ( L x W x H)

Net Weight

~40 Kg

Warranty 

 One-year limited warranty (Consumable parts such as heating elements, processing tubes, and o-rings are not covered by the warranty, please order the replacement at related products below.)

Laptop & software (Optional)
    
  • Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial) 
  • Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, record and plot data for MTI furnaces

Compliance
   
  • CE Certified
  • NRTL or CSA certification is available at an extra cost

Warning

Reference Video

 
Back to top