Li-Ion Battery Cathode - Aluminum Foil Single Side Coated by Li-NCM (9:0.5:0.5 ) (241mm L x 200mm W) 5 sheets/bag - bc-af-241NCM-SS911

This electrode sheet is based on Aluminum foil coated by Lithium Nickel Manganese Cobalt Oxide (Ni:Co:Mn = 9 :0.5:0.5, NCM911) on a single side and can be used as the cathode of Li-Ion battery -- 5 sheets /bag

SPECIFICATIONS

• Material:  LiNiCoMnO2  ?9:0.5:0.5)
• Current collector (substrate): Aluminum foil (16 microns, area density of 4.22mg/cm2)
  
• Coated Area: 241mm L x 175mm W. The edge width of blank area is 12.5 mm for each side.
• Single sides area density: 10.5 ± 0.20 mg/cm2
• Compaction density: 3.0 ± 0.1 g/cm3
• Coating Thickness: ~35 um
• Total Thickness: ~51 um
• Active Material Proportion in Powder: 95% (PVDF and Super P is 2% and 3%, respectively) 
• Specific Capacity: 202 mAh/g [0.1C, 3.0-4.3 V vs Li/Li+, Half Cell] [Electrolyte:1.0M LiPF6 in EC:DMC:EMC=1:1:1 Vol% with 1.0%VC]

• Note:  The electrode sheet shall be stored in a vacuum box, a vacuum oven or a glove box to avoid degradation
  

 for NCM

 for Aluminum