MTI  |  SKU: YLJCIP15

Compact CIP with 22mm ID Vessel Max. 380 Mpa for use in Glovebox - YLJ-CIP-15

€5.747,70

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

Compact CIP with 22mm ID Vessel Max. 380 Mpa for use in Glovebox - YLJ-CIP-15

MTI

YLJ-CIP-15 is the smallest cold isostatic pressing (CIP) in the world.  It has a 22mm ID hydraulic chamber made by ultra-strength alloy, which can provide isostatic pressure up to 400 Mpa via a 15T  hydraulic press.  It is an excellent tool to prepare high-density compound pellets and a small-diameter rod.  CIP-15 has a small footprint and can be placed in a glove box to prepare air-sensitive materials.  A plastic protection cover is included.  The machine also can be used as a pellet press.
Specifications:
Pressure Vessel
Max. Hydraulic Pressure in Chamber 300 MPa  -- continuous holding
380 MPa   --- less than 5 minute
Gauge Pressure Value to
Force Conversion



Optional digital meter with alarm
Gauge Displayed Pressure Value (Bar) for 87 mm Dia. Hydraulic Press
 100 200    300    387
Optional Digital Gauge Displayed Pressure Value (Mpa) for 87 mm Dia. Hydraulic Press 10 20 30 38.7
Actual Force Applied on the Hydraulic Press (Ton) 3.8      7.6     11.5  14.7 
Pressure Applied to CIP Vessel ( Mpa) vs 22mm vessel cylinder 98 196 296 380
  • Notes: 
  • The actual force applied to the Vessel Cylinder (Ton) equal to the force applied to your working piece
  • Digital pressure Gauge ( 60Mpa ) with Alarm  is available upon request ( Click picture to see specs & cost)
  • For calculating the actual pressure applied to your working piece, please follow the equation below:
    F=P_(Gauge Displayed Pressure Value (GDPV)) ×S_(Cross-section area of the inside piston)
    Since 1 Bar = 1.0197 kg/cm^2, Diameter of piston is 7cm
    Assume Gauge Displayed Pressure Value is 100
    F=101.97 ×?×(D/2)^2=3922.78 kg Force?3.9 Ton force
    Therefore, From pressure gauge value to actual force is 26.31
    Assume Diameter of your Die is 4 cm, and Gauge Displayed Pressure Value is also 100 Bar
    Then, the actual pressure on your working piece is:
    P_(actual on working piece )= F/S_(Cross-section area of the working piece ) 
    P_(actual on working piece )= (3.9 Ton)/(12.56 cm^2 )=310 Bar
    In general:
    P_(actual on the working piece )=(P_( GDPV)/26.31) / (?*r_(Crosection area of the working piece)^2 )
Hydraulic Machine
  •  15T Max.
Botton Cylinder Traveling Distance
 20mm maximum, the bottom cylinder (piston) in the cross-section illustration in the dimension section below
Operation Temperature 10 - 40°C
Dimensions
 

  • Working Spac: D1: 120mm D2: 70mm D3: 125mm H1: 250mm H2: 225mm

  • Overall: 200 L x 330 W x 550 H mm
Net Weight  70 Lbs
Shipping Weight & Dimensions
  • 100 lbs
  • 40"x 25"x30"
Compliance  CE Certified
Warranty
  • One year limited with lifetime support
  • Rusting and damage due to improper storage condition or maintenance are not covered by warranty
Operation Video    
Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic below to order ). Check this link to understand liquid rubber for sample preparation.  ( Pic. 1)
  • Also, you may use a chamber vacuum sealer to seal the sample before CIP ( Pic. 2)
  • In order to get a high density of the sample,  you shall press pre-pressing a pellet, then CIP ( Pic. 3)
  •             Pic. 1        Pic. 2       Pic. 3
Warning
  • Never let the press hold the target pressure be longer than 8 minutes,
  • It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red or green buttons in this period.
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
  • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance. (20mm)
Packing List:
Name Qty
1 Main machine (15T Manual hydraulic pressing machine) 1 unit
2 Cold isostatic pressing dies (locating plate, top, and bottom pressing die) 1 set
3 Black Rubber Rings O.D 7/8" 3 pcs
4 Pushing Rod Handwheel 1 pc
5 Hydraulic pressing oil 1 bottle
6 Socket Head Screw Driver 1 pc
Back to top