MTI  |  SKU: CIP35D900

900 Mpa CIP Die Set ( 35 mm ID. Vessel) for Cold Isostatic Press - CIP35D900

€0,00

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

900 Mpa CIP Die Set ( 35 mm ID. Vessel) for Cold Isostatic Press - CIP35D900

MTI

CIP35D900 is Complete CIP Die Set (Max. 900Mpa Vessel) for Cold Isostatic Press.  It has a 35mm ID x105mm hydraulic chamber made by ultra-strength alloy, which can provide isostatic hydraulic pressure up to 900 MPa via an 87T hydraulic press.  It is an excellent tool for the material research lab to prepare high-density compound samples at easy. 
 
Specifications:
Pressure Vessel Size
  • 35mm Dia. x 105 mm Height (pressing die cavity)
  • Max sample height: 75 mm Max
  • Made of high strength alloy with stainless steel protective jacket
Dimension
Ma. Hydraulic Pressure in Chamber
  • The pressure inside the vessel:   900 MPa  Max.
  • Requires Hydraulic force:             86.6  T Max. ( 8660 Kg)
Operation Temperature
  • 10 - 40°C
Maximum pressure holding time
  • 15 minutes (The time starts from the press reaches the target pressure value and ends by releasing the pressure)
Net Weight
  • 25   Kg
Warranty
  • One-year limited warranty with lifetime support.

    However, the warranty does NOT cover any equipment damage caused by misuse, negligence (such as overpressure), corrosion, and consumables.

  • 16 pieces of rubber O-rings are included.  However seal O-ring is consumable, not covered by warranty,  please click the picture below to order a spare one

  •
Operation Video 
   
Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic.1 to order).  Check this link to understand liquid rubber for sample preparation. 
  • You may use a small vacuum sealer to seal the sample before CIP inside a glovebox to avoid air contamination ( Click Pic. 2 to order)
  • You may use the machine as a dry pressing to order pressing die (click Pic below right)
  •      Pic. 1   Pic. 2   Pic. 3
    Warning
    • Never let the press hold the target pressure be longer than 8 minutes,
    • It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period.
    • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
    • If you order the die only and using your own press machine, , MTI is not responsible for the safety


    Packing List:
    Name Qty
    1 CIP pressing die 1 set
    2 Black Rubber Rings O.D (35mm)
    		 20 pc
    3 Pressing oil 1 bottle
    Back to top