1 2
MTI  |  SKU: CIP30-E300

CIP or WIP Die Set ( 30 mm ID. 300 Mpa Vessel) with Electrode Terminals for Battery Research - CIP30-E300

€2.984,25

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

CIP or WIP Die Set ( 30 mm ID. 300 Mpa Vessel) with Electrode Terminals for Battery Research - CIP30-E300

MTI

CIP30-E300 is CIP or WIP Die for solid-state battery research. It has a 30mm ID x110mm hydraulic chamber made of ultra-strength alloy with two electrode terminals. It can provide isostatic hydraulic pressure up to 330 MPa to study SSB properties vs. pressure and temperature. 
The following literature can be used as reference:
M. Dixit, et al., The Role of Isostatic Pressing in Large-Scale Production of Solid-State Batteries, ACS Energy Letter, 2022, 7, 3936-3946.
M. Dixit, et al. Isostatic Pressing of Multilayer Pouch Cells and Its Implications for Battery Manufacturing, Device, 2024, 2, 100370. 

Specifications:
Pressure Vessel Size
  • 30mm Dia. x 110mm Height (pressing die cavity)
  • Max sample size: 60mm highlight and 28 mm Width
  • Made of high-strength alloy with a stainless steel protective jacket
  • Two electrode feed-throughs are inserted inside the vessel to measure battery properties
Max. Hydraulic Pressure in Chamber 300 Mpa ( 43500 PSI)
 Hydraulic Machine optional
 24 T ( see the related product below )
Working Temperature 10 - 90°C
WIP option
 This die can be modified into a WIP die ( worm isostatic Pressing ) at the extra cost up to 90oC with heating tape and a programmable temperature controller ( Please click product option bar to order )

Electrochemical Testing Option

 The CIP or WIP die with electrode terminals that can be connected to a special battery analyzer for electrochemical testing.
Application Notes
  •      Pic. 1   Pic. 2  
Warning
  • Never let the press hold the target pressure be longer than 8 minutes,
  • Normally, the target pressure decreases a little bit during the pressure holding time, so never press the red or green button in this period.
  • Pressure must be completely released first, then make sure the hand wheel and the pressure release valve have been tightened before pressing
  • If you order the die only and use your own press machine, , MTI is not responsible for the safety


Packing List:
Name Qty
1 CIP pressing die 1 set
2 Black Rubber Rings O.D (30mm)   Important Spare  1 pc
3 Pressing oil 1 bottle
4 Hex-socket wrench (for top pressing die and degassing) 1 pc

 

Back to top