![[KMg3(AlSi3O10)F2] -Synthetized Fluorphlogopite Mica, 8x 8x0.2 thick (mm), as cleaved - Thasar Store](http://www.thasar.com/cdn/shop/files/Thumb_AL10105-t-90.jpg?v=1737475226&width=1500)
[KMg3(AlSi3O10)F2] -Synthetized Fluorphlogopite Mica, 8x 8x0.2 thick (mm), as cleaved
Couldn't load pickup availability
Delivery and Shipping to EU
Delivery and Shipping to EU
We will add in the quotation, the shipping, insurance, customs clearance costs.
![[KMg3(AlSi3O10)F2] -Synthetized Fluorphlogopite Mica, 8x 8x0.2 thick (mm), as cleaved - Thasar Store](http://www.thasar.com/cdn/shop/files/Thumb_AL10105-t-90.jpg?v=1737475226&width=56)
[KMg3(AlSi3O10)F2] -Synthetized Fluorphlogopite Mica, 8x 8x0.2 thic...
[KMg3(AlSi3O10)F2] -Synthetized Fluorphlogopite Mica, 8x 8x0.2 thick (mm), as cleaved
MTI
Synthetic fluorophlogopite is obtained by cooling and devitrification of chemical raw materials by high-temperature melting. The single wafer fraction is KMg3(AlSi3O10)F2, which belongs to the monoclinic system and is a typical layered silicate.
KMg3(AlSi3O10)F2 is a typical layered silicate. Many of its properties are superior to natural mica. For example, when the temperature is higher than 1200°C, the volume resistivity of synthetic fluorophlogopite is 1000 times higher than that of natural mica under high temperature conditions. The electrical insulation is good, and the vacuum is very low at high temperatures. As well as being resistant to acids, alkalis, transparent, separable and flexible, it is an important non-metallic insulating material for modern industries and high-tech industries such as motors, electrical appliances, electronics, and aviation.
- [KMg3(AlSi3O10)F2] -synthetized fluorphlogopite mica
- Size: 8 mm x 8 mm
- Thickness: 0.2 mm
- Surface Finish: as cleaved
| Density | 2.78~2.85 * 10^3 kg/m^3 | |
| Volume Resitivity | 10^15~10^16 ?·cm | |
| Surface Resitivity | 10^11~10^13 ? | |
| Dielectric Strength | 185~236kV/mm | |
| Permittivity | 5.6 ? | |
| dielectric loss | 1~4x 10^-4 tg ? | |
| Melting Point | 1375 ± 5 | |
| Max Working Temperature(Tmax) | 1100 | |
| Thermal Weight Loss (40 ~ 1180 | 0.85% | |
| Specific heat capacity | 836 J/kg · K | |
| Linear Thermal Expansion | () 10 ~ 12 x 10^-6/K | |
| (?) 15 ~ 25 x 10^-6/K | ||
| Thermal conductivity | () 3.75W/m·K | |
| (?) 0.55W/m·K | ||
| optical axial angle | 8° ~ 14° | |
| Hardness | Mohs Hardness | 3~3.4 |
| Microhardness Hv0.2 | 1.35GPa | |
| S | 138~146 | |
| refractive index | N_p | 1.513~1.544 |
| N_m | 1.539~1.564 | |
| N_g | 1.540~1.566 | |
| Ultimate tensile strength | 150~200MPa | |
| Compressive strength | 400~520MPa | |
| Water absorption | 0.14~0.23% | |
| Moisture absorption | 0~0.05% | |
| Mosaicity | < 0.25 | |
Coefficient of Linear Thermal Expansion (x10^-6/K)
| Temperature | 200 | 600 | 900 |
| Cleavage | 10.0 | 6.3 | 2.96 |
| ? Cleavage | 21.2 | 11.5 | 5.08 |
Volume Resitivity Under High Temperature (?·cm)
| Temperature | Room temperature | 300 | 500 | 600 | 700 | 800 |
| Volume Resitivity | 3.9 x 10^15 | 5.1 x 10^13 | 1.6 x 10^13 | 1.6 x 10^12 | 5.6x10^11 | 3.9x10^10 |
|
ITO Coated Glass / Plastic  |
|
|
|
SiC Ceramic Substrates
|
|||
![[KMg3(AlSi3O10)F2] -Synthetized Fluorphlogopite Mica, 8x 8x0.2 thick (mm), as cleaved - Thasar Store](http://www.thasar.com/cdn/shop/files/Thumb_AL10105-t-90.jpg?v=1737475226&width=640)