MTI  |  SKU: SP15AB

7 KW (30-80Khz) Bench Top Induction Heater with Timer Control - SP-15AB

€0,00

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

7 KW (30-80Khz) Bench Top Induction Heater with Timer Control - SP-15AB

MTI

SP-15AB Dual Station 15KW Induction Heater is designed for a material research lab to quickly melt and perform heat treating to metallic materials up to 1kg. The 2m long power cable allows the heating station and the control station to be located up to 2m from each other for operation safety. 
 
SPECIFICATIONS:
Working Voltage
208-240V AC, 50/60 Hz, Single Phase
Max. Input Current
  • 34 Amp  (Min. 40A breaker required)
  • Power cable included (It is suggested to use NEMA L6-50P twist-lock plug with 10AWG power cable)
Output Frequency 30-80 kHz
Heating Current 200-600 Amp
Max. Input Power 7 KW
Duty Cycle 80%
Max. Distance Between Heater and Controller 2m
Max. Sample Weight 1 kg
Control Panel
  • Automatic timer control or Manual control selectable
    • Manual Control: by Foot Pedal
    • Automatic Heating Time: 1-99 Seconds
    • Automatic Dwell Time: 1-99 Seconds
    • Automatic Colling Time: 1-99 Seconds
    Air Cooling Rear Fan
Water Cooling
  • Temperature range: 5 - 30°C
  • Water Flow Rate: 58 L/min
  • Water Tank: 15 Liters made of stainless steel
  • Note: It is recommended to use a specific coolant to get the best performance. It is normal to wait a couple of minutes for cooling down after several trials of heating
  • Note: the input voltage for the water chiller is 220V
Induction Coil & Accessories   
Display The digital display shows output power and current
Product Dimensions
  • Control Station: 18" x 8" x 17"
  • Heating Station: 12" x 8" x 13"
Warranty One Year limited warranty with lifetime support
Compliance
  • NRTL or CSA certification is available upon request at extra cost, please contact our sales representatives for a quote
Operation Manual     
           











Application Notes
Melting
  
  Sintering
  
  Annealing
  
  Heat treatment
  
  Quenching
  • The heater will shut down if over output occurs. Pls reduce coil cycle number to keep the heater operating under Max power
  • Melting time and temperature are related to materials, the crucible, refractory insulation, etc. 
  • You may melt metal samples in a vacuum using a 60mm dia half-open quartz tube with a vacuum flange/valve. Please click the picture below for details on how to set up the vacuum tube
  • For induction heating in the air or under the glove box, please contact MTI for the design below. 
              



Temperature Controller (Options)
  • In order to enable the temperature control function of this induction unit, please order the temperature controller  EQ-MTC-808
  • You may also to consider order the complete system EQ-SP-15TC from us

                         

Net Weight 25 kg (55 lbs)
Shipping Dimensions 40"(L) x 30"(W) x 30"(H)
Shipping Weight (Pounds) 45 kg (100 lbs)

STANDARD PACKAGE:
Item Description Qty Pictures
1 Heating Station 1
2 Control Station 1
3 Coil #1: 76.8mm(OD) x 66.0mm(ID)
Back to top