1 5
MTI  |  SKU: GSL-KR100

Automatic Flammable Gas Control and Disposal Device GSL-KR100

€0,00

Delivery and Shipping to EU

We will add in the quotation, the shipping, insurance, customs clearance costs.

Automatic Flammable Gas Control and Disposal Device GSL-KR100

MTI

GSL-KR100 is a combustion gas module to dispose of residual flammable gas via a self-ignition heating coil. It is designed to pair with any MTI tube and atmosphere furnaces. It can also control the gas flow rate and communicate with a Honeywell hydrogen gas detector. It is a good choice for experiments under a reducing environment, such as hydrogen flow. The device also has an RJ45 ethernet port for remote control and monitoring. 

SPECIFICATIONS
Power
  •  200W
Voltage
  • 110V, 208-240 VAC, Single Phase, 50/60 Hz
Features
  • Applicable to dispose of various residual flammable gas along the exhaust line (designated gas needs to be discussed with MTI in advance).
  • Compact, modularized, and compatible with various MTI furnaces. 
  • Interlocks: in case of emergency, the gas flow and furnace heating will be cut off. 
    • a flammable gas leak is detected
    • Failure of a self-ignition heating coil
    • Overpressure
    • Out of flammable gas flow. 
  • One check valve to prevent gas backflow. 
  • Two solenoid valve allows users to choose the flow type, inert or flammable. 
  • One mass flow controller, 0-1000 sccm. 
  • Double explosion protection: Pressure sensor and mechanical pressure relief valve. 
  • Constant pressure mode. 
  • Automated hydrogen treatment. 
  • Remote control, data monitoring, and log. 
  • Furnace tube gas purging
Flow rate
  • 0-1000 sccm
Gas Inlet
  • Two 1/4" compression tube fittings for both inert and flammable gas.
Hydrogen Gas Detector
The hydrogen gas detector is connected to the control box. The alarm is preset at 20% LEL for hydrogen. 
If alarmed, the hydrogen gas flow and furnace heating function will be cut off. 
          
PC Control
  • All operations need to be completed on the host computer
  • Manual purging and automatic purging modes are available
  • Constant pressure sintering mode: During the heating process, the control system will automatically adjust the air intake and output to keep the heating furnace in a slightly positive pressure state. (Range: 100,000pa-115,000pa)
Over Pressure Protection
  • The electronic pressure transmitter will turn on the exhaust valve to accelerate the exhaust if the set pressure reached
  • Mechanical overpressure exhaust valve (0.4 bar relative pressure)
Dimension
  • 500L × 450W × 750H (mm)
Net Weight
  • ~15Kg
Safety WARNING
  • If equipped with a tube furnace, a metallic mesh cover must be installed at both ends of the furnace tube in case of emergency
  • The furnace and the combustion equipment must be placed in a well-ventilated place, or in a fume hood
  • The hydrogen detector must be installed
  • Operators must be trained by qualified technicians & follow the safety guideline of the laboratory
Warranty 
  • One-year limited warranty (The warranty does not cover consumable parts such as heating elements, processing tubes, and o-rings, please order the replacement at related products from MTI.)
GSL-KR200 is a combustion gas module to dispose of residual flammable gas via a self-ignition heating coil. It is designed to pair with any MTI tube and atmosphere furnaces. It can also control the gas flow rate and communicate with a Honeywell hydrogen gas detector. It is a good choice for experiments under a reducing environment, such as hydrogen flow. 
Back to top